GE JGSP20 R Manuale Utente Scaricare il pdf (Pagina 24)

OPERATING THE SELF-CLEANING OVEN

Normal Cleaning Time: 3 hours

Before a Clean Cycle

Quick Reminder:

1. Prepare the oven for cleaning.

2. Close the oven door.

3. Press the CLEAN pad.

4. Press the INCREASE or DECREASE pad to

set clean time.

Step 1:

Remove the broiler pan, broiler rack, all

cookware and any aluminum foil from the oven—they

cannot withstand the high cleaning temperatures.

(Oven shelves may be left in oven. NOTE: Shelves

will discolor after the self-clean cycle.)

Step 2: Wipe up heavy soil on the oven bottom.

A. Oven Front Frame

B. Openings in Door

C. Oven Door Gasket

D. Oven Light

Step

3: Clean spatters or spills on oven front frame

(A), under the front edge of the oven vent, the door

liner outside the door gasket and the front edge of the

oven cavity (about one inch into the oven). Use

detergent and hot water with a soap-filled steel wool

pad, then rinse well with a vinegar and water mixture.

This will help prevent a brown residue from forming

when the oven is heated. Buff these areas with a

dry cloth.

How to

Set Oven for Cleaning

Step 1: Follow steps above to prepare the oven

for cleaning.

Step 2: Close the oven door.

Step 3: Press the CLEAN pad.

CLEAN

Step 4: Press the INCREASE or DECREASE pad

until desired Clean Time is displayed.

● Clean top, sides and outside front of oven door

with soap and water. Do not use abrasives or

oven cleaners.

Do not let water run down through openings (B)

in the top of the door. To help prevent water from

getting in these slots when cleaning, open the

door as far as it will go.

● Do not rub or clean the door gasket (C)—

the fiberglass material of the gasket has an

extremely low resistance to abrasion. An intact and

well-fitting oven door gasket is essential for

energy-

efficient oven operation and good baking results.

If you notice the gasket becoming worn, frayed or

damaged in any way or if it has become displaced

Oil

the door, you should have it replaced.

Step 4: Close the door and make sure the oven light

(D) is off.

Oven shelves may be cleaned in the self-cleaning

oven. However, they will darken, lose their luster and

become hard to slide. Wipe the shelf supports with

cooking oil after self-cleaning to make shelves slide

more easily.

Caution: Drip pans should never be cleaned in the

self-cleaning oven.

Do not use commercial oven cleaners or oven

protectors in or near the self-cleaning oven.

A combination of any of these products plus the

high clean cycle temperatures may damage the

porcelain finish of the oven.

Important

The oven door must be closed and all controls must

be set correctly for the clean cycle to work properly.

Clean Time is normally 3 hours. You can change the

Clean Time to anywhere between 2 and 4 hours,

depending on how dirty the oven is.

The self-clean cycle will automatically begin within a

few seconds and the word “ON” will appear on the

display. When the oven locks the word “LOCK” will

be displayed and, a short time later, the door will be

locked in position. It will not be possible to open the

oven door until the temperature drops below the lock

temperature.

Step

5: When the LOCK light is off open the door.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Commenti su questo manuale

Nessun commento

GE JGSP20 R Manuale Utente Pagina 24

Commenti su questo manuale

Prodotti e manuali riguardandi Fornelli GE JGSP20 R