GE CTR 80 Manuale Utente Scaricare il pdf (Pagina 56)

•

Set the set-point to 50°C and allow adequate time for the bath to reach

this temperature and stabilize. Adjust the DELTA calibration parameter

(see

Section 9.11.4) to make the bath temperature as measured with the

standard thermometer match the set-point. The approximate ratio between

a change in DELTA and a change in temperature at 50°C is about 4.0 to 1.

For example, if the bath temperature is high by 0.1°C at 50°C then de

crease DELTA by 0.4.

•

Set the set-point to –70°C and allow adequate time for the bath to reach

this temperature and stabilize. Adjust the BETA calibration parameter

(see Section 9.11.5) to make the bath temperature as measured with the

standard thermometer match the set-point. The approximate ratio between

a change in BETA and a change in temperature at –70°C is about –1.0 to

1. For example, if the bath temperature is high by 0.1°C at –70°C then in

crease BETA by 0.1.

11 Calibration Procedure

1 2 ... 51 52 53 54 55 56 57 58 59 60 61

Nessun commento

GE CTR 80 Manuale Utente Pagina 56