GE BR Series Guida di Installazione Scaricare il pdf

Lighting

Installation Guide

imagination at work

For Backlit Recessed Troffer Luminaires

Driver Replacement

BEFORE YOU BEGIN

Read these instructions completely and carefully.

WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

RISK OF FIRE

• Follow all NEC and local codes.

• Use only UL approved wire for input/output connections.

Minimum size 18 AWG (0.75mm

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.

RISQUES D’INCENDIE

• Respectez tous les codes NEC et codes locaux.

• N’utilisez que des ls approuvés par UL pour les entrées/sorties de

connexion. Taille minimum 18 AWG (0.75mm

Prepare Electrical Wiring

Electrical Requirements

• The LED driver must be supplied with 120-277 VAC or

347VAC, 50/60 Hz and connected to an individual properly

grounded branch circuit, protected by a 20 ampere circuit

breaker. Use min. 75°C supply conductor.

Grounding Instructions

• The grounding and bonding of the overall system shall

be done in accordance with National Electric Code (NEC)

Article 600 and local codes.

Components Supplied

• Driver of luminaire

Tools and Components Required

• T15 torx screwdriver

• UL listed conduit connections per NEC/CEC for nominal

conduit trades sizes ½” or ¾”

• UL recognized wire connectors

Save These Instructions

Use only in the manner intended by the manufacturer.

If you have any questions, contact the manufacturer.

Specications

Description Code Corresponding Luminaires

Backlit Troffer 22 and 14 driver (1-10V dimming) Backlit Troffer 22 and 14 Series

Backlit Troffer 24 driver (1-10V dimming) Backlit Troffer 24 Series

1 2 3 4

Sommario

Pagina 1 - Driver Replacement

GELightingInstallation Guideimagination at workFor Backlit Recessed Troffer LuminairesDriver ReplacementBEFORE YOU BEGINRead these instructions comple

Pagina 2 - Wiring Diagrams

Wiring DiagramsPSU(1-10V) +(1-10V) –+–Light Engine+–LineNeutralRemote Switch 1-10V (Optional)VIOLETGREYREDBLUEBLACKWHITE(1-10V) –(1-10V) +GNDNL1-10V D

Pagina 3 - Driver Replacement Steps

1 2Rotate latches to unlock the front bezel. Swing down panel and lift off front bezel.Driver Replacement StepsFor Backlit Troffer 22 and 24: unfasten

Pagina 4 - IND125-081414

87Rotate latches to lock the front bezel.Hang panel on its hinges and swing up into place. This device complies with Part 15 of the FCC Rules. Operati