GE NX-116E Manuale Utente

NetworX ™ NX-6 User Manual

8 Step 3 • Press the [STAY] key. • The stay light will illuminate indicating that all interior zones are bypassed. (All interior devices will byp

9 CANCEL / ABORT FEATURE (Optional, see page 1) The cancel light will flash during an abort delay time. If a code is entered followed by the [CAN

10 CHANGING USER CODES Step 1 Your system must be in the Disarmed state to change user codes. Step 2 Press [r]-[5]. Step 3 Enter a “Master Arm

11 LIGHT AUTHORITY LEVELS IF LIGHT 8 IS OFF 1 Reserved (Note: Do not change if on.) 2 Arm Only 3 Arm Only After Closing Time 4 Master Arm/Dis

12 OTHER KEYPAD FUNCTIONS SETTING THE KEYPAD TONE Step 1 Press [r]-[0]. Keypad is now in the “Adjust Tone” mode. Step 2 Pressing the [1] key

13 Step 2 Each time a zone is faulted, the zone light on the LED keypad will illuminate and the chime will sound. The number of the faulted zone(s)

14 Step 2 Enter the “Master Code “. Step 3 Enter the “hour code” which must be two (2) digits. Note: The clock is a 24-hour clock. Refer to the

15 SERVICE MENU The service light will be “on” if the security system requires service. If the service light is “on”, press the [r ] key followed

16 EMERGENCY EVACUATION PLANS An emergency evacuation plan should be established for an actual fire alarm condition. For example, the following ste

17 SYSTEM NOTES

NX-6 SYSTEM KEYPADIncludes models NX-108E, NX-116E, NX-124EPOWER Light is “on” when AC power is present; flashes to indicate a low battery condition.

NX-6 USER’S MANUAL NX6UD04 REV D (FEB 2004)

1 SECURITY SYSTEM NOTES Installing/Service Company _________________________________ For Service Call __________________________________________ Ce

2 THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY SYSTEM SHO

3 TABLE OF CONTENTS GLOSSARY OF TERMS ...4 UNDERSTANDING THE LIGHTS...

4 GLOSSARY OF TERMS Abort Delay: An option that allows a delay in reporting to the central station. There is a communicator delay of 30 seconds. It

5 UNDERSTANDING THE LIGHTS Armed Light The armed light is “on” when the system is armed. The armed light is “off” when it is disarmed. The armed

6 Ready Light The ready light is “on” when the system is ready to arm and “flashes” if ready to force arm. The ready light is off when the system is

7 KEYPAD FUNCTIONS ARMING YOUR SYSTEM IN THE “AWAY” MODE AWAY is used when the user is away from the premise and wants the interior protected. Lis