Ge ZKHCSS2 Manuale Utente

Navigare online o scaricare Manuale Utente per Congelatori Ge ZKHCSS2. GE ZKHCSS2 User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 4
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
Installation
Instructions
ZKHCSS2
Tubular Stainless Steel Handles
and Handle Side Trim
Right hand door swing models are illustrated in these
instructions. Follow these same instructions for left hand
models.
This kit provides for the installation of Tubular Stainless
Steel handles or custom handles on 3/4" overlay custom
panels.
Tools and materials required:
• #2 Phillips screwdriver
• Drill and 7/32", 1/8" bits and 7/8" spade bit
• Custom door panels,
• Safety glasses
• Center punch
• Hammer
• Pencil
Parts List:
A. Freezer tubular handle (95376) and
fresh food tubular handle (95377)
B. 4 Handle standoffs, 70536
C. 6 Screws for handle standoffs
#10-32x1" pan head machine screws (4 required, 2 extra), 36298
D. 6 Set screws (4 required, 2 extra) 70539
E. 3/32” Allen wrench for set screws, 70548
F. 6 Plastic spacers (4 required, 2 extra) 70540
G. 5 Trim screws (4 required, one extra) 8665
H. Handle side trim for LH models (75468), trim for RH models (75469)
Before you begin – Read these instructions completely and carefully.
Note to Installer: Be sure to leave these instructions with the Consumer.
Note to Consumer: Keep these instructions with your Owner’s Manual for future reference.
STEP 1 REMOVE DOOR AND
DRAWER HANDLES
• Open refrigerator door to 90°. Remove the 4 screws
holding the handle to the door.
• Remove 4 screws holding handle side trim. Discard all
screws and trim. Discard handle.
• Open freezer drawer to access handle and trim.
Remove and discard handle, retain screws and trim.
If you are installing custom handles, go to STEP 3.
B
C
E
H
F
G
D
A
Vedere la pagina 0
1 2 3 4

Sommario

Pagina 1 - Instructions

InstallationInstructionsZKHCSS2Tubular Stainless Steel Handlesand Handle Side TrimRight hand door swing models are illustrated in theseinstructions. F

Pagina 2

STEP 2 INSTALL TUBULAR STAINLESS STEEL HANDLES ONTO PANELS-2-CAUTION: Hole locations must be exact to accept handle standoffand handle assembly.Ass

Pagina 3 - 8 Screws

-3-STEP 3 INSTALL ASSEMBLED PANELSInstall8 ScrewsInstall 4Handle SideTrim Screws• Install custom handles according to the manufacturer’sinstructions.

Pagina 4 - Monogram

Pub. No. 31-46033-2Dwg. No. 197D4869P001(N.D. 532) 9/0275470Note: While performing installations described in this book,safety glasses or goggles shou

Commenti su questo manuale

Nessun commento